End lock version of the standard double acting, single rod version of the CQ2 compact cylinder. End of stroke locks are included can be used to hold a load in case of a loss of air pressure. The CQ2 is available in bore sizes from 20mm to 100mm. It comes standard with male or female piston rod threads. It is possible to mount auto switches on any of the 4 surfaces.

• Compact, double acting, single rod, end lock
• Bore size (mm): 20, 25, 32, 40, 50, 63, 80, 100
• Standard stroke (mm): 10 through 100
• Port thread types:  Rc, NPT, G
• Auto switch capable

Basic type cylinders with end lock prevent dropping when air supply decreases or residual pressure is exhausted. Separate air piping is not required for locking. Locking position can be at retracted end or at both ends, depending on the cylinder model. A wide variety of options are available.

• Double acting, single rod, end lock cylinder
• 16mm bore
• Mounting types: basic, axial foot, front flange, double clevis
• Standard strokes (mm): 15, 30, 45, 60, 75, 100, 125, 150, 175, 200
• Auto switch capable

Basic type cylinders with end lock prevent dropping when air supply decreases or residual pressure is exhausted. Separate air piping is not required for locking. Locking position can be at retracted end or at both ends, depending on the cylinder model. A wide variety of options are available.

• End lock cylinder, CBG1
• Double acting, single rod
• 7 mounting styles available
• Bore sizes (mm): 20, 25, 32, 40, 50, 63, 80 and 100
• Rubber bumper or air cushion standard
• Auto switch capable

Basic type cylinders with end lock prevent dropping when air supply decreases or residual pressure is exhausted. Separate air piping is not required for locking. Locking position can be at retracted end or at both ends, depending on the cylinder model. A wide variety of options are available.

• End lock cylinder, CBM2
• Double acting, single rod
• 8 mounting options available
• Bore sizes: 20mm, 25mm, 32mm, 40mm
• Auto switch capable

Basic type cylinders with end lock prevent dropping when air supply decreases or residual pressure is exhausted. Separate air piping is not required for locking. Locking position can be at retracted end or at both ends, depending on the cylinder model. A wide variety of options are available.

• CBA2, End lock cylinder
• Bores: ø40, ø50, ø63, ø80, ø100
• Proof pressure: 1.5MPa
• Cushion: interchangeable
• Variety of mountings available
• Auto switch capable

Basic type cylinders with end lock prevent dropping when air supply decreases or residual pressure is exhausted. Separate air piping is not required for locking. Locking position can be at retracted end or at both ends, depending on the cylinder model. A wide variety of options are available.

• End lock type air cylinder
• 6 bore sizes available: 32mm ~ 100mm
• 7 mounting styles available
• Double acting , single rod
• Auto switch capable

Basic type cylinders with end lock prevent dropping when air supply decreases or residual pressure is exhausted. Separate air piping is not required for locking. Locking position can be at retracted end or at both ends, depending on the cylinder model. A wide variety of options are available.

• Clean series air cylinder
• Double acting, single rod, end lock 
• Bore sizes (mm): 20, 25, 32, 40
• Auto switch capable