Airline Hydraulcs

EX500 - Distributed I/O

Back to Search

Products » Industrial Communication » Valve I/O
EX500, Decentralized Serial Wiring, GW System

EX500, Decentralized Serial Wiring, GW System

EX500 is a gateway unit to connect EtherNet/IP™ and DeviceNet™ to SMC valves and digital inputs for sensors for distributed I/O system. Each gateway can control up to 8 valve manifolds and 8 input blocks, with maximum of 128 outputs and 128 inputs. EX500-GEN2 supports Device level Ring (DLR) and EtherNet/IP™ Quick Connect function. The gateway module has IP65 protection while valve modules and input blocks have IP67 protection ensuring protection against dust and washdown environment.

  • GW system, 4 branches
  • Valve & input unit manifolds can be connected around the GW unit
  • Compatible with 64-digital-outputs & 64-digital-inputs
  • GW unit, input unit manifold: IP65
  • Valve manifold including SI unit: IP67

EX500, Valve Interface (SY, VQC, S0700, SV)

EX500, Valve Interface (SY, VQC, S0700, SV)

EX500 a gateway unit to connect EtherNet/IP™ and DeviceNet™ to SMC valves and digital inputs for sensors for distributed I/O system. Each gateway can control up to 8 valve manifolds and 8 input blocks, with maximum of 128 outputs and 128 inputs. EX500-GEN2 supports Device level Ring (DLR) and EtherNet/IP™ Quick Connect function. The gateway module has IP65 protection while valve modules and input blocks have IP67 protection ensuring protection against dust and washdown environment.

  • Valve interface for EX500-GEN2
  • Selectable 16 or 32 ouput by internal switch
  • IP67 protection rating
  • Compatible with New SY, VQC, SV and S0700 valve series

EX500, Input Block

EX500, Input Block

EX500 a gateway unit to connect EtherNet/IP™ and DeviceNet™ to SMC valves and digital inputs for sensors for distributed I/O system. Each gateway can control up to 8 valve manifolds and 8 input blocks, with maximum of 128 outputs and 128 inputs. EX500-GEN2 supports Device level Ring (DLR) and EtherNet/IP™ Quick Connect function. The gateway module has IP65 protection while valve modules and input blocks have IP67 protection ensuring protection against dust and washdown environment.

  • 16 inputs per module
  • Max sensor supply current 1.3A per unit
  • Short circuit protection
  • Plug & Play connection to the gateway

EX9-OE, Output Block

EX9-OE, Output Block

EX500 a gateway unit to connect EtherNet/IP™ and DeviceNet™ to SMC valves and digital inputs for sensors for distributed I/O system. Each gateway can control up to 8 valve manifolds and 8 input blocks, with maximum of 128 outputs and 128 inputs. EX500-GEN2 supports Device level Ring (DLR) and EtherNet/IP™ Quick Connect function. The gateway module has IP65 protection while valve modules and input blocks have IP67 protection ensuring protection against dust and washdown environment.

  • The EX9 output and power blocks can be used with the following SMC serial interface units: EX126, EX250, EX500.
  • Output and power blocks can be added to the valve manifold to effectively use any idle points for uses other than switching manifold valves.
  • Individual NPN output (for CC-Link) or PNP output (the rest) types are available depending on the protocol of the SI unit.
  • Two types of power supplies for the output block depending on the wattage load.
  • Applicable valve manifolds: VQC, SV.

EX9-PE1, Power Block

EX9-PE1, Power Block

EX500 a gateway unit to connect EtherNet/IP™ and DeviceNet™ to SMC valves and digital inputs for sensors for distributed I/O system. Each gateway can control up to 8 valve manifolds and 8 input blocks, with maximum of 128 outputs and 128 inputs. EX500-GEN2 supports Device level Ring (DLR) and EtherNet/IP™ Quick Connect function. The gateway module has IP65 protection while valve modules and input blocks have IP67 protection ensuring protection against dust and washdown environment.

  • The EX9 output and power blocks can be used with the following SMC serial interface units: EX126, EX250, EX500.
  • Output and power blocks can be added to the valve manifold to effectively use any idle points for uses other than switching manifold valves.
  • Applicable valve manifolds: VQC, SV.

EX500 Accessories

EX500 Accessories

EX500 a gateway unit to connect EtherNet/IP™ and DeviceNet™ to SMC valves and digital inputs for sensors for distributed I/O system. Each gateway can control up to 8 valve manifolds and 8 input blocks, with maximum of 128 outputs and 128 inputs. EX500-GEN2 supports Device level Ring (DLR) and EtherNet/IP™ Quick Connect function. The gateway module has IP65 protection while valve modules and input blocks have IP67 protection ensuring protection against dust and washdown environment.