DIN Rail mounting bracket for the EX600 End Plate.

• DIN Rail mounting for EX600 End Plate
• Enclosed parts: round head screw M4x20 1pc (w/washer for ZMA3)
• Enclosed parts: P-tight screw 4x14 2pcs

The reinforcing brace is needed, at the intermediate position, when connecting 6 or more EX600 I/O units together. The provided reinforcement prevents connection failure between the units due to deflection.

• For Direct or DIN Rail mounting
• Fasteners are included with bracket

Valve plate bracket for connecting the EX600 SI Unit to the valve manifold.

• Connects EX600 SI Unit to valve manifold
• Enclosed parts: round head screws M4x6 2pcs & M3x8 4pcs

Field-wireable connector for connecting the EX600 SI Unit to the fieldbus. Connector options include support for communication protocols CC-Link, DeviceNet™ , and PROFIBUS DP.

• Connects EX600 SI Unit to fieldbus
• Protocol support: CC-Link, DeviceNet™, and PROFIBUS DP®
• Order socket for fieldbus in, plug for fieldbus out

The power supply cable with M12 connector is used to connect the EX600-ED2 End Plate to a power supply. Available with straight and right angle connectors in lengths of 2m and 6m.

• Only for EX600-ED2 End Plate.
• Straight or Right Angle connector options
• Available lengths: 2m, 6m

Ethernet communication cable for EtherNet/IP, Profinet, EtherCAT and Powerlink.  A side: RJ45, B side: 4 pin M12 D-coded.

• Protection class: M12: IP67 and RJ45: IP20
• EX250, EX260, EX500, EX600
• Length: 1m, 2m, 3m, 5m, 10m

Communication cable with connector for connecting the EX600 SI Unit to the fieldbus. Connector options include support for communication protocols CC-Link, DeviceNet™ , and PROFIBUS DP.

• Connects EX500 Gateway unit to fieldbus
• Length: 5m
• B Coded M12 (Plug and Socket)