Plug-in type for JSY series is available in 3 valve body sizes, JSY1000 (6.4mm), JSY3000 (10mm) and JSY5000 (15mm).  JSY plug-in type is compatible with fieldbus, ethernet and wireless communication module such as EX600 and EX260.

• Plug-in type flow rate (Cv): JSY1000: 0.27; JSY3000: 0.70; JSY5000: 1.65
• Valve body width: JSY1000: 6.4mm; JSY3000: 10mm; JSY5000: 15mm
• IP67 protection rating (JSY1000: IP40)
• Maximum number of solenoid per manifold: 32
• Compatible with fieldbus, ethernet and wireless communication

Non plug-in type for JSY series is available in 3 valve body sizes, JSY1000 (6.4mm), JSY3000 (10mm) and JSY5000 (15mm).  It is available in side porting and bottom porting.  Non plug-in JSY is also available in dual 3-port configuration.

• Non plug-in type flow rate (Cv): JSY1000: 0.18; JSY3000: 0.42; JSY5000: 0.89
• Valve Body Width: JSY1000: 6.4mm; JSY3000: 10mm; JSY5000: 15mm
• Available in side porting or bottom porting
• Maximum number of stations: 20
• Individually wired

• Blanking plate, SUP/EXH Spacer, SUP/EXH Blocking Disk

JSY3000-S is a bottom ported valve manifold for panel mount.  JSY3000-S provides watertight seal with the panel with its EPDM gasket and protection against corrosion with standard stainless steel plate.  JSY3000-S is available with serial communicaiton such as EtherNet/IP™, IO-Link, PROFINET, and EtherCAT, along wit D-SUB and terminal block connection.

• Panel Mount Valve Manifold
• EPDM seal (IP67)+SUS304 stainless steel plate for improved corrosion resistance
• Compatible with serial communication via EX260, EX600 interface
• Available as 8, 12, 16, 20, or 24 stations

• Tool used for removing the tube from A and B port

JSY1000-E ejector and valve combination manifold has the ability to mount ejectors alongside valves. The devices have been integrated into one for applications which have a need for positive pressure and vacuum suction being used together. Stations can be ordered with built-in pressure sensors.

• Vacuum capable manifold
• New EX260-PEC1 specifically made for JSY-E
• Available up to 24 stations of single solenoid or 12 with double
• Optional built-in pressure sensor

Manifold combination of JSY3000 5 port solenoid valve and ZK2 vacuum generators into a single manifold. Reduced wiring and space saving for installation on robots. The combination manifold would also allow fieldbus communication to control ZK2 vacuum generators. Valves and vacuum generators have independent supply and exhaust to avoid effects of pressure fluctuations.