The basic male thread KN series air nozzle is available in a range orifice sizes for installation in Rc 1/8 through 1 ports.  These are available in both fixed and pivoting nozzle designs.  

• Nozzle with male thread
• Pivoting nozzle with male thread
• Max operating pressure: 1.0MPa
• Variety of tube materials available

KN and KNA(G) series air nozzles for One-touch fittings are easily installed in push-to-connect fittings.  The KNA(G) series is OSHA compliant for deadhead pressure for installation in locations where operator contact is a possibility.

• Nozzle for One-touch fittings
• Tube materials: KN-Q*A, KNA: PBT; KN-Q, KNAG: SUS
• Multiple nozzle diameters: KN-Q(*A) only
• Compatible fitting series: KN-Q*A, KNA: KQ2, KC, KB, KP, KX, KS, KQB2, KQG2; KN-Q, KNAG: KQB2, KQG2
• Meets OSHA 1910.242(B) standard for deadhead pressure [KNA(G)] only

The KNH series high efficiency air nozzle is able to provide improved thrust while drawing in ambient air for improved impact.  Additionally, the OSHA compliant design restricts dead-head pressure to less than 30 psi for safety.

• High-efficiency nozzle
• With male thread
• Connection size: 02 (R1/4)
• Nozzle size: 1.0, 1.5, 2.0

KNS series air nozzles are designed for reduced noise operation while still providing effective impact.

• Low noise nozzle
• Self align fittings
• Male thread type available
• Connection size: R1/8, R1/8, ø8, ø10
• Nozzle size: 0.75, 0.9, 1, 1.1

KNL series air nozzles with copper extension tubes enable the user to reach into a part or work cell to dislodge debris.

• Copper extension nozzle
• 0.3m & 0.6m available
• Can be connected to OST steel piping
  and flexible copper piping
• Variety of tube materials available

The KN series air nozzle with self align fittings is available in a range orifice sizes for installation on 4mm to 20mm tubing.  These are available in both fixed and pivoting nozzle designs.

• Nozzle with self align fitting
• Pivoting nozzle with self align fitting
• Possible to connect a nozzle
  without the need to machine threads
• Variety of tube materials available

KNP series sensing heads can be used with manometers to measure the impact pressure on a workpiece from a nozzle.

• Measuring part, gauge head
• Nozzle size: 2.5, 0.7mm
• Max operating pressure: 0.8MPa
• Measurement probe with pivot
  tube end configuration

The IN-225 series nozzles are designed to create a wide fan spray of coolant or water.  They are ideally suited for rinsing applications.

• Fixed or adjustable angle models
• Can be used with flexible copper or OST pipe
• Electroless nickel plated brass construction
• Coolant: water, air