The CY1S-Z Rodless Cylinder - Magnetically Coupled uses industrial strength magnets located in the piston and external carriage to form a single unit that will travel when actuated with air pressure.  It is a one piece unit integrated with slide bearings which provides lateral stability protecting it from side load impacts.  The CY1S-Z cylinder tube has lube retainers on the internal and external surfaces to retain lubrication.

• Bore sizes: 6, 10, 15, 20, 25, 32, & 40 (mm)
• Stroke lengths: 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1500 mm
• Minimum operating pressure: 0.18 MPa (26 psi)
• Speed: 50 ~ 400 mm/sec.
• Options: XB9 - Low Speed (15 ~ 50 mm/sec.), XB13 - Ultra Low Speed (7 ~ 50 mm/sec), 
• Auto switch capable

The NCY2S Rodless Cylinder - Magnetically Coupled uses industrial strength magnets located in the piston and external carriage to form a single unit that will travel when actuated with air pressure.  It is available in a standard or heavy duty magnetic holding force.  It is a one piece unit integrated with slide bearings which provides lateral stability protecting it from side load impacts.

• Bore sizes (nominal): 1/4", 3'8", 5/8", 3/4", 1", 1-1/4", 1-1/2"
• Stroke length: 2", 4", 6" 8", 10", 12", 14", 16", 18", 20", 24", 28", 32", 36", 40", 60"
• Minimum operating pressure: 26 psi
• Speed: 2 ~ 20 inch/sec.
• Auto switch capable