Products » Actuators » Actuator Accessories » Speed Controllers » AS (w/Built-in One-touch Fitting)
AS-FS, Speed Controller with Indicator, Elbow Type
The AS speed controller variants with indicator window allow for numerical verification of flow rate setting.
- Two indicator window directions available
- Larger push-lock type handle
- Reduces flow setting time and setting errors
AS*2*1FS, Speed Controller with Indicator, Elbow Type, Uni Thread
Using SMC flow controls with built in one-touch fittings minimizes installation time, reduces mounting height and enables a more compact machine design. These flow controls allow the body to be rotated to facilitate simple installation. Available in thread sizes from M3 to 1/2 in both inch (NPT) and metric R(PT) and with tube sizes from 3.2mm to 12mm OD (metric) and 1/8 to 1/2 OD (inch) and with optional elbow and universal style (increased flexibility) and meter in and meter out, these flow controls are designed to meet most applications.
- Two indicator window directions available
- Larger push-lock type handle
- Reduces flow setting time and setting errors
- Flow rate reproducibility
- Easier to insert and remove the tube
AS*2*1FSG, Speed Controller with Indicator, Elbow Type, Stainless Steel
Suitable for applications where copper free specifications are required, the “–FG” series can also be used in areas where wash down could degrade standard flow controls, such as food and packaging. This series is designed to offer the maximum control by increasing the number of turns of the needle to 10. The body and adjustment are made of high impact white resin for a clean look. This series also incorporates SMC’s one-touch fitting available for tubing sizes from 4mm to 12mm OD.
- Easier to operate w/larger handle
- Wide viewing angle
- Two indicator window directions available
AS*2FS, Speed Controller with Indicator, In-line Type
Using SMC flow controls with built in one-touch fittings minimizes installation time, reduces mounting height and enables a more compact machine design. These flow controls allow the body to be rotated to facilitate simple installation. Available in thread sizes from M3 to 1/2 in both inch (NPT) and metric R(PT) and with tube sizes from 3.2mm to 12mm OD (metric) and 1/8 to 1/2 OD (inch) and with optional elbow and universal style (increased flexibility) and meter in and meter out, these flow controls are designed to meet most applications.
- Speed controller with indicator, In-line type
- Max. operating pressure: 1MPa
- Tubing Material: nylon, soft nylon, polyurethane, FEP, PFA
- Body Size: M5, 1/8, 1/4, 3/8, 1/2