JSB series is an air operated valve for water, steam and air that utilizes angle seat structure to minimize pressure loss.  JSB has stainless steel 316L equivalent material as standard and port size ranges from 3/8" to 2".  With its robust design of scraper and guide bushing, JSB series can achieve over 3 million cycles (steam) or 10 million cycles (water, air).

JSP series is a 2-port direct operated proportional control solenoid valve for general purpose air and water.  JSP uses the current to smoothly control the flow rate.  It has a standard stainless-steel enclosure to have superior resistance to both corrosion and water.  Internal stopper is utilized to reduce metal noise and longer service life.  JSP series utilizes new coil technology to maximize magnetic efficiency and reduce energy consumption.  JSP has the option to be either base mounted or body ported.

JSX series is a 2-port direct operated solenoid valve for general purpose air, water and oil.  It has standard stainless-steel enclosure to have superior resistance to both corrosion and water.  JSX series utilizes new coil technology to maximize magnetic efficiency and reduced energy consumption.  Internal stopper is utilized to reduce metal noise and longer service life.

JSXD series is a 2-port pilot operated solenoid valve for general purpose air, water and oil.  It has standard stainless-steel coil cover to have superior resistance to both corrosion and water.  JSXD series utilizes new coil technology to maximize magnetic efficiency and reduced energy consumption.  Internal stopper is utilized to reduce metal noise and longer service life.

The VDW series is a compact direct operated 2/3 port solenoid valve for air, water and medium vacuum. Available body materials include resin, brass or stainless steel. Resin body is offered with one touch fitting to reduce installation time. It is suitable for applications that requires a small footprint and flow of less than Cv of 0.30.

The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.

The VXZ series is a 2 port, pilot operated solenoid valve capable of operating at higher differential pressure by maintaining a zero pressure differential pressure on the valve seat. It is compatible with wide range of fluid. Flow rate ranges from Cv of 1.7 to 10.2.

The updated VXD series is a pilot operated, 2 port solenoid valve. The new VXD is not only smaller, but uses less power compared to the previous version. Available in brass and stainless steel, the VXD series also offers low concentration ozone resistant and oil free options. Flow rate ranges from Cv of 1.9 to 49.

The VX3 series is a direct operated, 3 port solenoid valve, for use with a wide variety of fluids. It has an IP65 enclosure rating and with its special construction metal noise is reduced (DC specification). The series is also flame resistant and conforms with standard UL94V-0.

Series VCH series is a pilot operated solenoid valve for high pressure applications. Designed for use with air or inert gas, the VCH valve can operate up to a maximum pressure of 5.0MPa. Reduction in the overall volume of the pilot chamber means the VCH's responsiveness can now be measured in just milliseconds. Non-collision armature construction, rubber buffers and a urethane diaphragm give the VCH series an expected service life of 10 million cycles.

The VQ20/30 series is a pilot operated, two port multi-media valve. The series is compact and lightweight with a large flow capacity. The VQ20/30's long life, high speed coil (up to 20 million cycles at 100cps for pneumatic use) along with its all plastic construction, make it an excellent choice for those who want high performance at a lower cost. Available as single unit and manifold.

The direct air operated 2 and 3 port valve series VXA can be used with a wide variety of fluids. The manifold for the VXA21/22 series is available in a common SUP style or individual SUP style (for vacuum use). The VXA31/32 series manifold is individually ported. Valves for both are easily replaced without changing existing piping.